Card Making

Today I thought I’d make a little greetings card.

Card Dimensions.

The card measures 4½” x 5½” (approx. 10cm x14 cm). The outside of the frame measures 3″ x 3¾” (approx. 7.75cm x 9.5cm).

The vellum panel.

I started with a piece of vellum die cut to the size of the frame. To add colour to the vellum, I applied Twisted Citron and Pine Needles Distress Inks with a foam ink blending tool to what would be the reverse side of the vellum panel.

This was something new to me and a bit of an experiment to boot. The inks blend very smoothly on vellum, though you do have to be extra careful not to bend the vellum. That leaves a noticeable crease in it that can’t be removed or easily disguised. I managed to bend a corner; however, as I was going to trim the vellum down later, I wasn’t at all concerned.

I was surprised at how quickly the inks dried on the vellum, and I was soon able to work on adding my embossed design.

To do this, I used some ball ended embossing tools on the reverse side of the vellum. I drew an entangled art design with them as I would when using a pen on paper.

Once I’d drawn my design, I added some shading using a Pergamano shading tool as well as some dots in the upper part of the image.

Dry embossing on vellum causes the vellum to curl somewhat. So, I passed the piece through a laminator. That corner that I’d creased while ink blending got firmly creased during this process. However, I knew I’d be able to hide it with the frame I’d planned to make.

At this point, I added some gold dots to the ‘sky’ part of the design. To do this, I used a Uniball Signo gold glitter gel pen. I can’t resist adding sparkle when I can.

My last step was to trim the vellum to ¼” (7mm) smaller than the frame.

Making the frame.

To make the frame, I used some stitch edge rectangle dies from Gemini by Crafter’s Companion along with a Sizzix Big Shot machine along with some white card. I cut three frames out, doing my best to centre the inner die to the outer die.

I used some Tombow Mono Liquid Glue to stack the three frames. It was then I noticed I’d not centred the inner die precisely the same on each frame. I can see where they don’t quite perfectly match up.

I decided to use them and learn from the process. I’ve never made a frame like this before, and this card really was, in many ways, an experiment.

Assembling the card.

The next task was to attach the vellum to the frame. I carefully applied a very thin layer of the Tombow glue just inside the inner edge of the frame. I carefully added the flattened vellum to it.

The vellum, though, had started to curl again and try as I might to flatten it out, it just wasn’t going to play ball. In hindsight, it may have been better if I’d trimmed it and run it through the laminator just before attaching it to the frame. Then, to keep the vellum flat on my worktable and apply the frame to the vellum.

The last step was to use glue to attach the frame to the card base.

Thoughts on the card.

Even though I’ve bungled a couple of things, I’m quite pleased with how the card has turned out.

Flattening the vellum through the laminator has decreased the intensity of the white embossed lines. However, I didn’t pass it through once, but a few times to see if I could get the corner to stay down. When the vellum got stuck in the laminator, it took me a while to dig out a pair of tweezers to pull it through. That introduced a bigger curl in the paper than I had to start with! I decided then that the only way to flatten the vellum this way was to use a folded piece of paper to act as a carrier for it.

It was a good idea in principle. In practice, I made mistakes and will learn for the future.

Die-cutting and stacking multiple frames. How to get the inner die centred the same as the others? I don’t know. Maybe I should try washi or craft tape the dies together. I will work it out as I like the look of the frame!

I do like the look of the embossing on the coloured vellum. The white lines are quite soft, though less prominent than I wanted them to be as I reduced them by trying too often to flatten the vellum through the laminator. It’s a rather ethereal looking design, and I like that. Sometimes I find my usual black line-art too stark against colour.

The white background of the card doesn’t help the white to stand out. Maybe I’ll try to add colour to the card base and then apply the coloured vellum over it. That’s an experiment for another day, perhaps. Or maybe soon when my mind is still on it. I think I have time before I need to head off out this afternoon.

So, Angela, how are you today?

I’m feeling tired and a bit spaced out, yet contented.

Therapy yesterday was emotional and distressing. No EMDR was done as I was too emotional for it, and I needed to talk about somethings that I’ve touched upon in recent blog posts.

My weighted blanket arrived yesterday, and it is rather lovely. I don’t know about making you feel you’re being hugged; I’ve only laid down under it so far. However, it feels so lovely that I just wanted to stay there this morning. I will try wrapping it around my shoulders and so on to see how it makes me feel that way.

I mention this as I slept in the evening under it, and through the night. Although I still feel tired, I know I had a good sleep. I may get in another sleep before I need to head out later today, depending on how lost in art I get. I do have a relatively long drive (around 2 hours) to where I need to be, and another 2 hours home, so a good sleep is perhaps in order.

Despite some good sleep, I’m still quite tired. The emotional rollercoaster of the past two weeks or so is taking it’s toll on me, even though I’m making sure I’m practising self-care and self-soothing.

Doing a short art project this morning – the greetings card – is a self-soothing activity. The style of art I created – my entangled art – is familiar enough to me that it is comforting to do. It’s comfort art, which is healthier for me than comfort eating.

Talking of eating. The emotional upsets of the past few days have taken their toll on my digestive system too. I had a badly upset stomach yesterday, and I’m still feeling quite tender in my abdomen today.

This is not an uncommon side-effect of either therapy or emotional rollercoasters for me. As I feel emotions so much in my abdomen, particularly fear and anxiety, then it’s no surprise I end up with sudden trips to the loo!

As I settle down, so my digestive system does, and things return to normal, eventually.

I’ve said this before, and no doubt I’ll say it again, this is part of the healing journey. Events sometimes seem to conspire to shake up the next layer of trauma from the past so it can be processed and I healed.

A few days or a few weeks of painful emotional turmoil is a small price to pay for the eventual years and years (I hope) of a life untroubled by and not held back by my past. A future where I can form those healthy relationships of all kinds with others that I yearn for, a yearning that has recently been reawakened, along with its attendant traumas.